Rotary 17*32*4 Shaft Rb 9rb Gamma Rings Axial Face Seals

• Customization: Available
• Material: NBR
• Usage: Engine, Transmission, Rear Axle, Dust Proove
• Model NO.: 9RB
• Type: Haplotype
• Speed: High Speed
• Pressure: Pressure Type
• Lip: Lips Type
• Standard: Standard, Nonstandard, Customized
• More Material: FKM PTFE PU
• Transport Package: Carton
• Specification: Standard or custom sizes
• Trademark: Pinmo
• Origin: China
• HS Code: 4016931000
• Production Capacity: 100000 PCS / Week

Product Description

Product Description

Rotary 17*32*4 Shaft Rb 9rb Gamma Rings Axial Face Seals
An axial face sea (gamma seal) is a v-ring with an outer metal case added to it. Like a v-ring, an axial face seal mounts directly on a shaft and seals axially against either the housing or the metal case of a shaft seal. By incorporating a metal case into an axial face seal, they are able to seal out heavier contaminants than a v-ing would be able to. Unlike a V-ring, an axial face sea is not completely elastic - as a result of the addition of the outer metal case. This means that each axial face seal is designed for a specific shaft diameter rather than a range of shaft diameters like a v-ring. As was the case with v-rings, an axial face seal can either be used in conjunction with a shaft seal to provide additional contamination exclusion, or they can be used by themselves in an application. 
Pinmo offer two standard axial face seal styles. The two styles that are offered are RB and 9RB.

The RB style axial face seal is the industry standard for face seals. An RB style axial rubber sealing lip. Therefore, when an RB style seal is installed into an application there is a narrow gap between the edge of the metal case and the housing. RB style seals are offered for shaft diameters ranging from 10 mm to 135 mm.
The 9RB style axial face seal is similar to the RB except that the O.D.edge of the metal case extends beyond the rubber sealing lip. Because the metal case extends beyond the sealing lip, a groove needs to be machined into the housing to accept the metal case. In application where heavy contamination is a consern, an 9RB style seal would be better than an RB because with the metal case extending into the housing there is a labyrinth created. By incorporating a labyrinth into the application the 9RB longer seal life. 9RB style seals are offered for shaft diameters ranging from 10 mm to 135 mm.
Both the RB and 9RB style face seals are typicaly offered in 80-durometer NBR with a zinc coated carbon steel case. Unlike standard shaft seals the sealing elements of axial face seals are made out of 80-durometer NBR instead of 70-durometer to increase the wear resistance from contaminants. Pinmo offes other material combinations for the RB and 9RB seals. If you are interested in using an axial face seal but prefer something other than NBR and carbon steel contact Pinmo Engineering to discuss material options.
Rotary Shaft RB 9RB Gamma Rings Axial Face Seals

RB Gamma Seal Size Chart						9RB Gamma Seal Size Chart
Type	ID (mm)	OD (mm)	Width (mm)	Shaft Diameter (mm)		Type	ID (mm)	OD (mm)	Width (mm)	Shaft Diameter (mm)
RB10	10	24	3.5	15		9RB10	10	24	3.5	15
RB12	12	26	3.5	17		9RB12	12	26	3.5	17
RB15	15	30	4	21		9RB15	15	30	4	21
RB16	16	32	4	23		9RB16	16	32	4	23
RB17	17	32	4	23		9RB17	17	32	4	23
RB18	18	33	4	24		9RB18	18	33	4	24
RB20	20	35	4	26		9RB20	20	35	4	26
RB22	22	40	4	28		9RB22	22	40	4	28
RB24	24	40	4	30		9RB24	24	40	4	30
RB25	25	40	4	31		9RB25	25	40	4	31
RB26	26	40	4	32		9RB26	26	40	4	32
RB28	28	43	4	34		9RB28	28	43	4	34
RB30	30	47	4.5	37		9RB30	30	47	4.5	37
RB32	32	49	4.5	39		9RB32	32	49	4.5	39
RB35	35	52	4.5	42		9RB35	35	52	4.5	42
RB40	40	57	4.5	47		9RB40	40	57	4.5	47
RB45	45	62	4.5	52		9RB45	45	62	4.5	52
RB48	48	65	4.5	55		9RB48	48	65	4.5	55
RB50	50	70	5.5	58		9RB50	50	70	5.5	58
RB52	52	72	5.5	60		9RB52	52	72	5.5	60
RB53	53	73	5.5	61		9RB53	53	73	5.5	61
RB55	55	75	5.5	63		9RB55	55	75	5.5	63
RB58	58	78	5.5	66		9RB58	58	78	5.5	66
RB60	60	80	5.5	68		9RB60	60	80	5.5	68
RB62	62	82	5.5	70		9RB62	62	82	5.5	70
RB65	65	85	5.5	73		9RB65	65	85	5.5	73
RB68	68	88	5.5	76		9RB68	68	88	5.5	76
RB70	70	90	5.5	78		9RB70	70	90	5.5	78
RB72	72	92	5.5	80		9RB72	72	92	5.5	80
RB75	75	95	5.5	83		9RB75	75	95	5.5	83
RB78	78	98	5.5	86		9RB78	78	98	5.5	86
RB80	80	100	5.5	88		9RB80	80	100	5.5	88
RB85	85	105	5.5	93		9RB85	85	105	5.5	93
RB90	90	110	5.5	98		9RB90	90	110	5.5	98
RB95	95	115	5.5	103		9RB95	95	115	5.5	103
RB100	100	120	5.5	108		9RB100	100	120	5.5	108
RB105	105	125	5.5	113		9RB105	105	125	5.5	113
RB125	125	148	6.5	133		9RB125	125	148	6.5	133
RB135	135	159	6.5	145		9RB135	135	159	6.5	145

Rotary Shaft RB 9RB Gamma Rings Axial Face Seals

Different   Type   Rotary   Shaft   Oil   Seal
Type	Material	Lip	Spring	Feature
TC	NBR & FKM	Double Lips	Single	Metal Coverd Rubber
TB	NBR	Double Lips	Single	Metal Case
TA	NBR	Double Lips	Single	Metal Case
SC	NBR & FKM	Single	Single	Double Metal Shell
SB	NBR	Single	Single	Metal Case
SA	NBR	Single	Single	Double Metal Shell
DC	NBR	Double Lips	Double	Double Springs
VC	NBR & FKM	Single	Without	Metal Coverd Rubber
VB	NBR	Single	Without	Metal Case
TCV	NBR	Double Lips	Single	High Pressure
TCN	NBR	Double Lips	Single	High Pressure
PTFE	PTFE	Single & Double Lips	Without	Stainless steel
HTCL	NBR & FKM	Double Lips	Single	Inside thread L
HTCR	NBR & FKM	Double Lips	Single	Inside thread R
......................................................................................................... More types please contact us.  Customization is welcome.

Standard Type Of Oil Seals: 
    S Type: SC SB SA
    T Type: TC TB TA
    V Type: VC VB VA
    K Type: KC KB KA
    D Type: DC DB DA
Helix Line Design: HTCL HTCR HTC
O.D. Grooved Rubber / Metal Outer: SBG TBG
Grooved Rubber Outer: SG TG VG
PTFE Lip Seals: KA3J   TCJ
House Rotate Design: OSC OTC
V-Ring: VA=VR1   VS=VR2   VLAnti-High Pressure Design: SEC TCA TCN TCV TEC SEB
Shock Absorber Used Seals: DC4Y TC4 SVY
Power Steering Used Seals: HPS   HPS(G)   SGJY   SCAJY   SCJY   SCJY(I)   ISZ   SD7   TC4Y
Spark Plug Holder Used Seals: SCY  SCYI  VCY  Y1  Y2  Y3
End Cover: RCA  RCA5  RCA51
Valve Steam Seals: VSB
Complex Seals: M   QLF   QLN
Other Type Seals:  KCY   SCAY   TBP   TC3   TC5   TC5Y   TC6   TC6Y   
                                TCU   TC9   TM   TZ   TCK   HTGL-BI   BUGA5
rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc oil seal manufacturer

Related Products

Rotary Shaft RB 9RB Gamma Rings Axial Face Seals
 rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc

Company Profile

Liuzhou Pinmo Sealing Sci-Tech Co., Ltd. is a scientific and technological production enterprise integrating R&D, production and sales. Our production plant covers an area of about 2,000 square meters and has 150 employees.

QMS (Quality Management System):
ISO9001, ISO/TS16949

Our Products: 
O Ring, Oil Seal, Hydraulic & Pneumatic Seal, Custom Molded Rubber Parts

Production Standard: 
ASTMD2000

Product Application Scope:
Engineering machinery, hydraulic pneumatic, petroleum and natural gas, automobile seals, valves and pipelines, electronic home appliances, food grade, electric power, chemical industry, coal mine, metallurgy, engineering shield machine and other industries, supporting domestic automobile and machinery manufacturers.

We had sell to:  
More than 40 countries including the United States, Germany, Japan, Britain, Italy, Spain, Russia, Canada, Australia, Malaysia, Philippines, Indonesia, Mexico, Brazil, Peru, Chile, Argentina, Israel, Saudi Arabia, Lebanon, Ukraine, Pakistan, Thailand, Vietnam, etc. 

Packaging & Shipping

Rotary Shaft RB 9RB Gamma Rings Axial Face Seals
Ship by express, by air, by sea at buyer's option.
 rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc oil seal manufacturer

FAQ

Q 1. What's the payment term?
A: We accept T/T 50% deposit and 50% balance against copy of B/L or L/C at sight, West Union,VISA,Paypal is also accepted. rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc oil seal manufacturer
Q 2. What is the normal lead time for product orders?
A: Generally it is 1-2 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to quantity.tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal

 tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture

 Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc oil seal manufacturer

Q 4. Could you please tell us the month capacity of your products ?
A: It depends on which model, we produce more than 2500 tons rubber materials per month.

tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture
Q 5. what kind of certificates you have ?
A1: We have been ISO9001:2008 and ISO14001:2004 certified by SGS since 2015.
A2: We have various rubber compounds approved by ROHS and REACH.

tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture
Q6: How to check the quality of the bulk order?
A1: We provide preproduction samples before mass production for all customers if needed.
A2: We accept third party inspection such as TUV, INTERTEK, BV, etc.

tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture
Q 7: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.rubber oil seal tc oil seal rubber seal manufacturer oil seal tc nbr oil seal tc oil seal fkm oil seal china manufacturer oil seal tc oil seal nbr tc oil seal fkm tc oil seal manufacturer

Q8: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, FPM(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ), FFKM, Liquid Silicone, Sponge, etc. tc oi
l seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture

Q9: Do you provide maintenance on tooling?
A: We maintain all tooling and will replace as needed.tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture

Q10: How many empolyees you have?
A:We have 150 empolyees at time of December 2020. tc oil seal tc oil seal nbr tc oil seal nbr rubber oil seal fkm oil seal fkm rubber oil seal manufacture china oil seal manufacture

If you have any other question, please don't hesitate to contact us:
Rotary Shaft RB 9RB Gamma Rings Axial Face Seals